TM Doctor Blade

Precision cleaning with minimal wear and tear on the belt. Designed for small spaces.

The TM Doctor Blade Primary cleaner is suitable for small spaces. It has a flexible configuration and choice of blade types and tensioning devices. The modular blade is designed to allow for blade wear compensation and reduce manual handling

Features and Benefits

Mainframe

The mainframe is available in either mild steel or stainless steel constructions, which means that corrosive environments can be catered to.

Tensioning Devices

There are several typed of tensioning device available to maintain the blade to belt pressure throughout the life of the blade. This provides optimal cleaning performance while preserving blade wear rates removing material that would otherwise pass between the belt and the blade surface. Differing styles of tensioning device are and can be customised to suit what is available at each plant. ESS tensioning device allows blade adjustment while the conveyor is still running from outside the chute, allowing the applied pressure to be fine-tuning without the need to stop production.

Blade Type

Modular blade design provides increased wear life and ability to change blade order or material. Constant Angle, Radial Pressure (CARP) blade profile assures that there is a consistent even blade to belt contact throughout the life of the blade. This provides efficient and protective cleaning. A variety of urethane types allow blades to conform to the belt profile and conditions.

Urethane

Urethane blade material protects the belt surface and splices from damage and is designed to fold back and pull through rather than damage the conveyor belts surface or splices if the belt reverses or experiences rollback. The risk of conveyor belt damage or replacement and subsequent downtime to repair or replace is effectively reduced.

  • How does it work?

    The TM DOCTOR BLADE is a conveyor belt Primary Cleaner mounted on the face of the conveyor head pulley and is designed to peel off the thick layer of loosely adhering material that often accounts for 85%-95% of carryback. It's designed to clean the conveyor belt in the direction of the design.


    The TM DOCTOR BLADE is typically used in conjunction with at least one secondary cleaner, such as the ESS Inline cleaner, and often with a water spray system. The segmented blades can be easily removed by sliding on and off the mainframe and suitable for use on crowned head pulleys and damaged or grooved belts.


    Important points concerning the TM DOCTOR BLADE are:


    • The cleaner should be positioned lower on the head pulley to ensure the blades are clear of the main material flow on slower-moving conveyor belts.
    • A tensioner is required on both sides to ensure equal pressure across the cleaning face for belts greater than 1500mm wide and or belts 1200mm wide and greater; or for certain heavy-duty applications, a mainframe stiffener is required. 

  • Backup and support

    At ESS, we stand behind our products with a 100% guarantee. We take pride in manufacturing all our products at two distinct locations within Australia. Additionally, we have local stores and service crews in most Australian mining centres to assist with installation, service, inspection, and troubleshooting. Our designers and engineers can also create customised solutions to meet your plant's unique needs.

Related Products

xhd

XHD Primary

dt primary

DT Primary

single piece

SINGLE PIECE BLADE

compact plus

COMPACT PLUS

Contact our team to enquire more about our primary belt cleaners

Contact Us
Share by: