With the Hawg Bone™, the blades meet the belt at a negative angle, presenting no snag or danger to the belt or splices.

The Hawg Bone™ can subsequently be tensioned firmly into the belt to remove the slimy film of fines commonly left by the primary cleaner.


The ESS Engineering Services & Supplies Hawg Bone™ is normally mounted under the head pulley or elsewhere on the return strand of the conveyor belt.

The Hawg Bone™ is therefore intended to be used in conjunction with a primary cleaner (such as the Trac-Mount™ or the DURT TRACKER™) and a suitable spray-wash system.

Belt width: 450-2400mm

Quick contact

Share by: