The DT Torsion Arm is normally mounted under the head pulley or elsewhere on the return strand of the conveyor belt. The blades of the DT Torsion Arm meet the belt at a negative angle, presenting reduced danger to the belt or splices.
The blades are set at a scraping angle to the belt, providing precise cleaning while cleaner arms absorb the impact of splices or other irregularities of high-speed belts.
The DT Torsion Arm can be tensioned firmly into the belt to remove the slimy film of fines commonly left by the primary cleaner. The product is therefore intended for use with a primary cleaner (such as the TM or the DT Primary cleaner), and a suitable spray-wash system.
Belt width: 450-2,400mm
Belt speed: N/A