ESS IS EXHIBITING AT AIMEX 2017 (29-31 August), VISIT US AT  STAND  1224! CLICK HERE TO REGISTER! 
ESS IS EXHIBITING AT THE PNG INDUSTRIAL & MINING RESOURCES EXPO 2017 (9-10 (AUGUST), VISIT US AT STAND 32!

compact-plus


The Compact Plus is normally used in conjunction with at least one secondary cleaner, such as the ESS Compact Secondary, and often with a water spray system. For slow moving belts, the cleaner should be positioned lower on the head pulley to ensure the blades are clear of the main material flow.

The cleaner requires an access point in the conveyor chute to install and replace the urethane blades. This should be in the form of a covered door of sufficient size to allow a technician to reach in and recover the blades. The access door should comply with all current conveyor and safety regulations. 

Application

Application The Compact Plus Primary Cleaner is normally mounted on the face of the conveyor head pulley and is designed to peel off the thick layer of loosely adhering material that often accounts for 80% - 90% of carry-back.

Belt width: 300-900mm

Quick contact

Share by: