The Compact Plus is normally used in conjunction with at least one secondary cleaner, such as the ESS Compact Secondary, and often with a water spray system. For slow moving belts, the cleaner should be positioned lower on the head pulley to ensure the blades are clear of the main material flow.

The cleaner requires an access point in the conveyor chute to install and replace the urethane blades. This should be in the form of a covered door of sufficient size to allow a technician to reach in and recover the blades. The access door should comply with all current conveyor and safety regulations. 


Application The Compact Plus Primary Cleaner is normally mounted on the face of the conveyor head pulley and is designed to peel off the thick layer of loosely adhering material that often accounts for 80% - 90% of carry-back.

Belt width: 300-900mm

Quick contact

Related Products Product Literature Installation Instructions   Assembly Drawing   Arrangement Drawing
Share by: